Plugs & Sockets

PLUGS
16 Amps Ang. J20 3 AP 2 pole + IP44
16 Amps Sgt. J20 3 SP 2 pole + IP44
16 Amps Sgt. J16 5 SP 3 pole +N+ IP44
32 Amps Sgt. J32 3 SP 2 pole + IP44
32 Amps Sgt. J32 5 SP 3 pole +N+ IP67
63 Amps Sgt. J63 5 SP 3 pole +N+ IP67
SOCKETS
16 Amps Ang. J20 3 AS 2 pole + IP44
16 Amps Sgt. J20 3 SS 2 pole + IP44
16 Amps Ang. J16 5 AS 3 pole +N+ IP44
32 Amps Ang. J32 3 AS 2 pole + IP44
32 Amps Ang. J32 5 AS 3 pole +N+ IP67
63 Amps Ang. J63 5 AS 3 pole +N+ IP67
Contacts nickel plated to prevent from corrosion
Brass Frame Terminals with a large clamping area uniformcontact pressure andlow contact resistance
Soft contact for 16A, 32A & 63A easy to plug in easy to pull outuse less force and benefit from optimum mechanical and electrical properties
High temperature resistant contact carrier for severe conditions standard in 63A
Contact tube a component which establishes electric contact insockets a special elastic spring ensures perfect contact evenafter repeated plug in.
 

Position of ground contact with respect to major for various voltages and frequencies, designated by Clock face positions in accordance with table 104 taken EN 60309 - 2 : 1992

Type Frequency
Hz		 Rated Operating Voltage
V		 Position of Ground Contact
16A/32A 63A
2P+E 50 and 60 200 to 250
6 6
3P+N+E 50 and 60 200/346/ to 240/415
6 6
 
Product
Reference Standards
Working temperature
Insulation Voltage
Dielectric Strength
Insulation Resistance
Contact Resistance
Max. Withdrawal force
Rated Operating Voltage
Rated Operating Current
No. Of Poles
No. Of Poles		 :
:
:
:
:
:
:
:
:
:
:
:

 Industrial Plug & Socket
IS/IEC 60309 Part 1 and Part 2
-25 degree C to + 80 degree C
690V AC/DC
2500V per/minute
>5 Meg. Ohm.
<25 Mili. Ohm.
150 N
240V/415V (AC)
16A/32A/63A
3 & 5
1.25 times the rated current, 1.1 times the rated Voltage, power factor 0.6lag.
 
Marks and symbols in accordance with IEC 309-1 : 1988 The following symbols are used.
A Ampere Operation On Load No Load
V Volt 16A 5000 -
~ Alternating current 32A 1000 1000
Ground 63A 1000 1000
IP44 Splash Proof      
IP67 Watertight      
These markings are easily visible on plugs and Sockets after installation and connection and when in service as prescribed by the manufacturer:

COLOUR CODING

If, in addition of regulation marking, the rated operating voltage is also indicated by a colour coding, this must be in accordance with IEC 309 Rated Operating 

Voltage Colour code
200 to 250 V Blue
380 to 480 V Red


TOP